Product Detail

AUDI A4 Convertible (8H7, B6, 8HE, B7) 2.0 TFSI 16V 2006-2009

AUDI A3 (8P1) 2.0 TFSI 2004-2012

AUDI A3 (8P1) 2.0 TFSI quattro 2004-2012

AUDI A6 Saloon (4F2, C6) 2.0 TFSI 2005-2011

AUDI A4 Avant (8ED, B7) 2.0 TFSI 2004-2008

AUDI A4 Avant (8ED, B7) 2.0 TFSI quattro 2004-2008

AUDI A6 Avant (4F5, C6) 2.0 TFSI 2005-2011

AUDI TT (8J3) 2.0 TFSI 2006-2010

VW PASSAT Saloon (3C2) 2.0 FSI 2005-2010

VW VENTO III (1K2) 2.0 TFSI 2005-2010

VW PASSAT Variant (3C5) 2.0 FSI 2005-2010

VW EOS (1F7, 1F8) 2.0 FSI 2006-2008

SEAT ALTEA (5P1) 2.0 TFSI 2006-2009

SEAT LEON (1P1) 2.0 TFSI 2005-2011

Description

Fitment: A4 Convertible (2002- 2009); A3 (2003 – 2012); A6 (2004- 2011) and so on.

OEM Replacement Number:06F133062A,06F133062E,06F133062G,06F133062J,06F133062M,06F133062Q .Please reference your old Electronic Throttle Body to check it.

Item-condition: Complete Throttle Body Assembly – Includes Throttle Actuator, Idle Air Control and Throttle Position Sensor.

Function:Electronic throttle is the throttle pedal and throttle between the traditional cable link, but through electronic sensors to control, control accuracy is higher, to improve the throttle hysteresis phenomenon.frequently requires replacement as internal electronic sensor failure and excessive wear and tear.

We are promise Within 1 year if have any damage will send the replacement. if have any question（Such as electric throttle control actuator fails, cracks, stops working or any other problems,）, please contact with us, we will solve it for you. please don’t worry and feel free shopping. thank you

Some Tips

What’s a throttle body?

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel-injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors.

How can a throttle body be cleaned?

This is why the butterfly and throttle body need periodic cleaning. After removing it from the intake, clean the throttle body with an aerosol solvent carburetor/fuel injection cleaner and  small brush, or cotton cloth. Pay particular attention to the throttle butterfly, which is attached with small screws (often staked to the throttle pivot to prevent removal) but you don’t need to remove it to clean it.

If the throttle position sensor (TPS) or air flow sensor are on the throttle body, be careful with them. Removal of the TPS may require recalibration afterwards. Mass Air Flow (MAF) sensors are very sensitive to being contaminated, and have a specific solvent spray just for cleaning them.