Product Detail

FORD CROWN VICTORIA 4.6 2005-2011

FORD E-150 5.4 2005-2014

FORD E-250 5.4 2005-2014

FORD E-350 5.4 2005-2015

FORD E-450 5.4 2006-2015

FORD ECONOLINE 5.4 2005-2014

FORD EXPLORER 4.6 2003-2010

FORD EXPLORER SPORT TRAC 4.6 2007-2010

FORD F-150 4.6 2002-2006

FORD F-150 HERITAGE 4.6  2004

FORD F-250 SUPER DUTY 4.6 2005-2006

FORD LOBO 4.6 2004-2006

FORD MUSTANG 4.6 2005-2010

LINCOLN LS 3.0 2003-2005

LINCOLN TOWN CAR 4.6 2005-2011

MERCURY MOUNTAINEER 4.0 2003-2010

Description

Fitment For: 2005-2010 Expedition;2004-2010 F-150;2005-2010 F-250 Super Duty;2005-2010 F-350 Super Duty;2007-2010 Lincoln Navigator and so on.

Throttle Body OEM Replace #:3L5E9F991AC, 3L5E9F991AD, 3L5U9F991AE, 6R3E9F991AA, 9W7E9F991AA, 9W7E9F991BA, 9W7Z9E926A, 337-05428, S20020.Please reference our original Electronic Throttle Body to check it.

HOWYAA 9W7Z9E926A Throttle Body IAC Idle Air Control TPS Actuator Assembly is features a butterfly valve which is electronically controlled by the ECU to precisely open and close to regulate the fuel/air mixture. Exactly OEM design to replace your defective engine throttle body.

Item-condition: Complete Throttle Body Assembly – Includes Throttle Actuator,Idle Air Control and Throttle Position Sensor with the aluminum casting construction for an exact fit, performance match and corrosion resistance.

We are promise Within 1 year if have any damage will send the replacement. if have any question（Such as electric throttle control actuator fails, cracks, stops working or any other problems）, please contact with us, we will solve it for you. please don’t worry and feel free shopping. thank you.

Some Tips

What’s a throttle body?

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel-injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors.

How can a throttle body be cleaned?

This is why the butterfly and throttle body need periodic cleaning. After removing it from the intake, clean the throttle body with an aerosol solvent carburetor/fuel injection cleaner and  small brush, or cotton cloth. Pay particular attention to the throttle butterfly, which is attached with small screws (often staked to the throttle pivot to prevent removal) but you don’t need to remove it to clean it.

If the throttle position sensor (TPS) or air flow sensor are on the throttle body, be careful with them. Removal of the TPS may require recalibration afterwards. Mass Air Flow (MAF) sensors are very sensitive to being contaminated, and have a specific solvent spray just for cleaning them.